![]() | ![]() ![]() ![]() ![]() ![]() | |
Merz Antique Firearms ~ Catalog of Old Guns and Related ItemsAntiques, Collectibles & Unusual Old Things
EXTREMELY RARE MODEL 1879 WINCHESTER CARTRIDGE BOARDItem # W112
INTERESTING AMERICAN FLAGItem # W527 Used for advertising at sporting goods store in Waterville Main. It says " Winchester Rifles and Shotguns and Ammunition". Towards the bottom it says " Buy all of your Winchester sporting goods at Dakins Sporting Goods 67 Temple Street Waterville Maine". I understand only a few of these have surfaced. They were done in about 1915. Measures 11 by about 7-1/2" high. Neatly framed and looks great. Colors are bright. An extraordinary piece of American History. This flag was produced before the law was passed that you could not deface the American flag.
ELEY CARTRIDGE BOARDItem # M830-19-554 Marked across the top of the board is "Eley Grand Prix Cartridge". It shows the entire process from the beginning of the shell cartridge to the finished product. An interesting looking board manufactured by the Imperial Metal Industries (which stands for Kynoch) Limited, Birmingham England. Board measures 27-1/2" x 21" and is in excellent condition. Fairly scarce board.
VERY WELL MADE CONTEMPORARY PIPE TOMAHAWKItem # M843-19-514
TATONKA CARTRIDGE DISPLAY BOARDItem # M833-19-557 From Waco Texas. Overall size is 20" by 21". Cartridges on display range from the 17 caliber Remington to the 458 Winchester mag. All labeled and identified. Quite a decorative board.
NEWHOUSE ONEIDA COMMUNITY NO. 2 TRAP WITH MARKED SPRINGSItem # el-17-552 Good cond.
BEAUTIFUL NOBEL’S SPORTING CARTRIDGE BOARDItem # M5-722-19-553
ELEY SPORTING AMMUNITION DISPLAY BOARDItem # M832-19-552
LYLE LINE THROWING CANNONItem # M900-19-565 2-1/2" bore. 28" steel bbl. Muzzle is marked "USCO-B 87-VGN-HTP" and s/n "930". Overall cannon is in beautiful condition retaining most of the original Japan black finish. Included with this lot is a copper brass top threaded powder canister with a powder measure as well as two line throwing projectiles. Also comes complete with a contemporary screw worm for removing a charge and a ram rod.
ELEY KYNOCH CARTRIDGE BOARDItem # M5-721-19-559
VERY UNIQUE WINCHESTER CARTRIDGE DISPLAY BOARDItem # M829-19-560
VERY DECORATIVE ENGLISH SHOT SHELL AND BIG GAME RIFLE DISPLAY CARTRIDGE BOARDItem # M5-720-19-555
NO. 15 NEW HOUSE BEAR TRAPItem # M857A-19-564
SMALL CHILD’S OR SALESMAN SAMPLE SADDLEItem # M5-153-19-561
NO. 15 NEW HOUSE BEARTRAPItem # M857C-19-564
NICELY DONE PIPE TOMAHAWK BY A WELL KNOWN MAKER WILLIAM BUCKLEYItem # M825-19-511
COLLECTION OF ROY ROGERS MEMORABILIA FROM THE ROY ROGERS MUSEUMItem # SSR-19-551
VERY EARLY UNUSUAL 17TH CENTURY POWDER TESTERItem # M837-19-512
CONTEMPORARY PIPE TOMAHAWKItem # M842-19-515
NICE IDEAL LOADING TOOL NO. 6 IN 32-40 M WITH ORIGINAL BOXItem # LT2032-19-517 Tool is very shiny with 95% nickel. Missing the decapper plug, but does come in original box. Box has seen better days.
INTERESTING OLD CROSSBOWItem # M5-626-18-111 Measures about 29-1/2 long (32" counting the lever in front) and 21" wide. A neat wall hanger.
UNUSUAL MINIATURE CROSSBOWItem # M5-625 Approximately 17-1/4 long, and 13-1/4" wide. Great conversation piece.
S NEWHOUSE NO. 5 BEAR TRAPItem # 5706-17-546
ANTIQUE BLACKSMITHS MADE BEAR TRAPItem # 5705-17-545 11" jaws with two springs, one measuring 12" and the other is a narrower spring measuring 10" with a repair at one end. It is rather crudely made but still quite colorful with a nice aged patina. Still a truly functional trap. A good wall hanger.
NEW HOUSE NO. 5 BEAR TRAPItem # 5703-17-544 11" jaws with two 13-1/2" long springs. The pan is marked with the early style "5" in the center and a single line "S Newhouse Oneida Community New York". It is an attractive looking trap with a 30" chain. Overall shows a nice patina to it. All original.
ANTIQUE BLACKSMITHS MADE BEAR TRAPItem # 5704-17-543 11" jaws with two 14" long springs and a large, 4-1/2" roughly cut pan. Overall trap looks fairly interesting with a good aged patina coloration. It also has a "U S" marking on top of one of the jaws. Complete with a 2' long chain attached to it. Quite a colorful item that would make a good camp wall hanging.
VICTOR NO. 3 TRAPItem # el-17-553 Cast jaws, Dec 16, 1902, May 28, 1907 Pat. Missing stake ring. Good cond.
IMPRESSIVE LARGE HOLLAND & HOLLAND SHOTGUN SHELL AND CARTRIDGE DISPLAY BOARDItem # M5-618-19-556 A total of 81 pieces in a very attractive frame which measures 25-1/2" x 28-1/2", excellent condition.
U.S. CAVALRY ARMY HORSE BRIDLE AND SNAFFLE BITItem # MERZ8-13-407 With U.S. brass insignia. In nice cond but does have age cracks in the leather straps.
TWO-HANDLED WOOD SCRAPER / HIDE SCRAPER / TOBACCO CUTTERItem # Scraper520 With 8-3/4 blade which is marked '225' with 'RW' inside a Heart/Pyramid shape. Orig hardwood handles in great shape, blade has been cleaned. Put the kids to work scraping logs for the hunting shack or other menial chores.
PROBABLE WOODEN CRATE BRANDING IRONItem # IRONB12 45/70/US CAV" is fashioned from 2" x 12" in size from a 1" thick chuck of steel. 20" round handle with round loop at the end. 9 pounds.
SOUTH TEXAS BRANDING IRONItem # IRONB11 Large 'PG'; Very decorative, four supports, one separated but fixable, shank opens to accept wooden extension. 27 long.
SOUTH TEXAS BRANDING IRONItem # IRONB10 Capital 'V'; Three supports, shank opens to accept wood extension. 22 long.
SOUTH TEXAS BRANDING IRONItem # IRONB9 'M' with a 'P' sharing a leg, 'S' shape sideways at base of 'P'. 'Flying' symbol? Three supports intact, one support missing, shaft opens to accept wooden extension. 15 long.
SOUTH TEXAS BRANDING IRONItem # IRONB8 Large 'A' with an 'L' utilizing one leg of the 'A', a small 's' is on the end of the 'L's foot: hence 'ALs'. This must have been Capone's iron. Three supports, twisted shank, end opens to accept wooden extension.
SOUTH TEXAS BRANDING IRONItem # IRONB7 Large 'G' and two upside down 'V's-each supported individually by threee supports. End of shank has an 'O' shaped handle. Very unusual, 27 long.
SOUTH TEXAS BRANDING IRONItem # IRONB6 Large 'L' and a smaller 'C'; Perfect iron for someone named Elsie who has 'critters'. Three supports, twisted shank, end opens to accept wood extension. 19 long.
SOUTH TEXAS BRANDING IRONItem # IRONB5 Interesting 'M' shape with an 'A' included on one side. Four supports, 18 overall, end opens to accept wood extension.
SOUTH TEXAS BRANDING IRONItem # IRONB4 Interesting example with a 'T' on a tipped over'C' (could ba a 'T' and upside down 'Y') sharing a shank. Three twisted supports, twisted shank, end opens to accept a wooden extension, 17.
SOUTH TEXAS BRANDING IRONItem # IRONB3 Two 'C's placed back to back like a mirror image. Four supports, shank twisted, end opens to accept a wooden extension. 17.
SOUTH TEXAS BRANDING IRONItem # IRONB2 A 'V' letter with the top of one arm having a little 'S' shape. Flying V? 18 overall, pointed end to drive into a wooden handle. Three twisted supports.
SOUTH TEXAS BRANDING IRONItem # IRONB1 Diamond shaped, riveted at four points to a 20 shaft which will accept a wooden extension handle.
BEAUTIFUL PAIR OF CHILEAN SILVER INLAID SPURSItem # M5-600
SHOOTING MEDAL & JACKET PATCHItem # M5-65 1st Place 50 Yd. Individual. Humbolt Park Gun Club, Chicago, IL, Picnic" 9-11-1932. Patch indicates NRA affiliation.
WINCHESTER FAMILY SCALEItem # 402j
SHOEMAKERS STANDItem # SHOE Base is 13.5 tall, can be attached to workbench using screws (one screw notch broken off). Complete with three interchangeable 'feet': lengths = 7", 8.5" and 10". (The feet also make excellent candle holders).
WINCHESTER NO. W11 FOOD GRINDERItem # 402a 5 from table top, excellent condition.
WINCHESTER NO. W32 FOOD GRINDERItem # 402b 6-1/4 high from table top to top of hopper. Shank broken near crank handle-shouldn't be too hard to fix. Otherwise VG cond.
WINCHESTER PIPE WRENCHItem # 402c 14 with wood handle, VG+ condition.
WINCHESTER PIPE WRENCHItem # 402e 8 with wood handle, VG+ condition. Rare.
WINCHESTER MONKEY WRENCHItem # 402d Coe's pattern (No. 1002). 8 long, very nice condition.
WINCHESTER STAG HANDLE CARVING KNIFEItem # 402f Marked 'Winchester, Trade Mark, Made In USA'. 9 blade, 14" overall, one piece stag antler handle.
WINCHESTER KITCHEN SLICER KNIFEItem # 402g Marked 'Winchester Trade Mark, Made In USA, Stainless, 733?. In good condition.
ORIGINAL WINCHESTER MODEL 1894 CARBINES SHIPPING CRATEItem # 7221-19-241 Great sturdy dovetail-jointed wooden crate measuring 11 x 11 x 41-1/2 inches. Each end is labelled 10 Winchester Carbines Model 1894" in black, with the W logo & trademark info printed in red. These markings are heavy, stamped into the wood. The caliber "30 W.C.F." & some sort of an order number (hard to read) were printed lighter, apparently as the case was filled. Inside are some dividers for the guns. Overall crate is in very good condition. The gun dividers are partially present
MODEL 1879 COMBINATION SCREWDRIVER TOOLItem # N153-ELS With this tool, the trooper could carry out all necessary maintenance on his Springfield carbine or Colt revolver. Marked 'US Mod. 1879'. Exc cond.
COMBINATION SCREWDRIVER TOOLSItem # EXMN150X Pivoting type for different sized screws. Tools are in VG condition, two available.
SPRINGFIELD MODEL 1870 COMBINATION TOOLItem # EXMN99X Pivoting type screwdriver and notched head for mainspring vise. 2 available, VG condition.
MILITARY BUTTONSItem # EXMN98 1 large Eagle Shield with bolt stud; 1 medium sized lead backed U.S. Shield; 9 assorted coat/tunic buttons.
CIVIL AND INDIAN WAR PARIS MARKED BRASS AND LEATHER TRIMMED FIELD GLASSESItem # EXMN82 Adjustable for distance. Very clear optics. Marked 'Day & Night' U.S. Signal Service.
Page 1 of 2
|
|
|||||||||||||||||
|
|
|||||||||||||||||






Next Page